How many types of interfaces does synchronization have? What is the difference between a splice belt and a seamless belt? Can the splice belt be replaced with a seamless belt?

[Polyurethane connecting timing belt VS polyurethane seamless timing belt] 1. How many types of interfaces are available for synchronization? Barbary synchronous belts are equipped with two endless belts: no interface (seamless synchronous belt)/with interface (connected to synchronous belt) (pin connected to synchronous belt) 2. What is the difference between a splice belt and a seamless belt? The connection is equipped with a hot melt interface or pin connection. The wire is not continuous, so the position of the interface is worse than the belt body; while the seamless steel wire is continuous, so there is no weak point of tension; seamless is more resistant grind. 3. How to connect the white polyurethane open timing belt? Use a tooth plate/tooth block to fix the two ends of the belt separately, or fix the two ends of the belt to a tooth block. 5. Will the wire break? Do you want to ask about seamless timing belt? The seamless synchronous belt is made of a high-strength spiral steel wire core and a high-wear-resistant thermoplastic polyurethane material. Due to the use of the endless seamless steel wire belt core, there is no connection and welding position, which greatly enhances the strength and tensile strength of the belt, so it is very suitable for power transmission and high-load transportation. It depends on what machine it is applied to. If it is not necessary, it is recommended to use a connecting synchronous belt, which can not only reduce the cost of use, but also achieve good results. 6. The original equipment of our glass factory is connected to the synchronous belt. Can I change the seamless synchronous belt now? Under normal circumstances, the tensile force of a double-sided mill will be relatively large, and it will be seamless in many cases, but the tensile strength may not be very good. After using for a period of time, even if the belt is intact, the surface rubber is worn out. The original standard cannot be reached. The price of the connecting belt will be lower than that of the seamless belt.